Bulletproof Fabric Ballistic NIJ IIIA UHMWPE UD-manufacture,factory,supplier from China

By means of different protection stage: consistent with the ga141-2010 wellknown, the bulletproof vests are divided into 6 stages: ga-1 to ga-6; in u.s., in line with the nij0101.06 wellknown, there are six tiers: nij iia, ii, iiia, iii, iv and the unique one.by means of the different ballistic material: beneath and include the level ga-three and the nij iiia, the vests are made from aramid ud cloth or pe ud, they're tender bulletproof vest; above the level ga-three and nij iiia, we ought to upload the hard ceramic plates to the vests to offer a higher safety, so they're 1/2-soft bulle

SpecificationPlace of originChinaProtection levelNIJ IIIADensity180-250g/m2ThicknesscustomizedSizecustomizedMaterialAramid UD 

Specification Place of originChinaMaterialMonolithic Silicon Carbide Ceramic or othersCeramic Coverage250*300mm*22mmWeight 2.3±0.05kgCurvatureMulti CurveOut finish600D black oxford fabric coveringProtection LevelNIJ0101.06 level III ICW

SpecificationTypeAramid FabricStylePlainTechnicsWovenFeature flame-retardant,bulletproof,chemical-resistant,heat-insulation,non-conductingDensity200X200Material100% Para AramidPatternPlainWidth100cmUSEGarment,Industry,Military,Firefighter,chemical,Aerospace,Metallurgy,Car,Tent...Yarn Count1500D    

• Nij protection degree:Comply with nij 0101.06 level ll-iiia backface signature (bfs) is less than 44mm• Safety function:Front, lower back, sides, shoulder, neck & groin• Cloth:Uhmwpe or kevlar®• Accessories:Safety level can be multiplied through adding ballistic inserts (front/back) into desired region• Provider material:Nylon, oxford & cordura®•Color:Black, olive inexperienced, navy blue, camouflage, and so forth• Size:S to xxl size/ customized size

By way of way of manner of diverse safety stage: consistent with the ga141-2010 tremendous, the bulletproof vests are divided into 6 tiers: ga-1 to ga-6; in u.s., in line with the nij0101.06 trendy, there are six levels: nij iia, ii, iiia, iii, iv and the unique one.by means of way of the awesome ballistic material: below and embody the level ga-three and the nij iiia, the vests are made from aramid ud material or pe ud, they'll be mild bulletproof vest; above the quantity ga-three and nij iiia, we have to upload the hard ceramic plates to the vests to provide a better protection, so they

By different protection level: In China, according to the GA141-2010 standard, the bulletproof vests are divided into 6 levels: GA-1 to GA-6; In USA, according to the NIJ0101.06 standard, there are six levels: NIJ IIA, II, IIIA, III, IV and the special one.By the different ballistic material: below and contain the level GA-3 and the NIJ IIIA, the vests are made from aramid UD fabric Or PE UD, they are Soft bulletproof vest; above the level GA-3 and NIJ IIIA, we must add the hard ceramic plates to the vests to provide a higher protection, so they are half-soft bulletproof vest.Our light bulletp

Features:High ballistic performance with low weightUsing high-tenacity ballistic kevlar® fiberUnique processing approach and ideal healthy suspension deviceItem   Protection       LevelMaterialThicknes  (mm)Inside/Outside(mm) Size     Head  Circumference        (mm) Weight(kg)Protection   area(m2)  Long   Axis Minor  Axis Inner HeightFASTNIJ0106.01standard IIIAKEVLAR®6.8/7.8255/269200/214165/172 L54-581.5/1.6±0.050.111NIJ0106.01standard IIIAKEVLAR®6.8

Our moderate bulletproof vests can used for all varieties of ballistic safety necessities; multiple hundred kinds to your preference: which includes entire-safety bulletproof vest, desired bulletproof vest, concealable bulletproof vest, outer bulletproof vest, floating bulletproof vest, fast-detachable bulletproof vest and female bulletproof vest for ladies, and so forth. we can also layout and manufacture the bulletproof vest for unique use primarily based on our clients, real call for.

QGF03 helmet:china army widespread gadget Metal helmet:metal fabric helmetItemProtection LevelMaterialThickness (mm)Inside / Outside(mm)SizeHead Circumference (mm)Weight(kg)Protection area (m2)Long AxisMinor AxisInner HeightWENDYNIJ0106.01standard IIIAKEVLAR® &PE8267/280228/241173/180L58-621.35±0.050.125QGF03NIJ IIIA.9mm & GA293-2012 level IIKEVLAR®6.7251/264223/236164/171M54-581.25±0.050.112NIJ IIIA.9mm & GA293-2012 level IIKEVLAR®6.7261/274229/242173/180L57-611.35±0.050.125NIJ IIIA.9mm & GA293-2012 level IIKEVLAR®6.7276/290240/254183/190XL60-641.55±0.050.138STEEL HELMETN

Via unique safety degree: in china, in line with the ga141-2010 stylish, the bulletproof vests are divided into 6 tiers: ga-1 to ga-6; inside the usa, regular with the nij0101.06 popular, there are six levels: nij iia, ii, iiia, iii, iv and the specific one.with the useful resource of the specific ballistic material: beneath and encompass the level ga-3 and the nij iiia, the vests are made from aramid ud fabric or pe ud, they are gentle bulletproof vest; above the extent ga-3 and nij iiia, we have to upload the tough ceramic plates to the vests to offer a higher safety, so they're 1/2 of o

By special protection degree: in china, in line with the ga141-2010 fashionable, the bulletproof vests are divided into 6 stages: ga-1 to ga-6; in america, in keeping with the nij0101.06 popular, there are six degrees: nij iia, ii, iiia, iii, iv and the special one.with the aid of the exclusive ballistic fabric: underneath and include the level ga-three and the nij iiia, the vests are made from aramid ud material or pe ud, they're gentle bulletproof vest; above the level ga-3 and nij iiia, we ought to upload the tough ceramic plates to the vests to offer a higher protection, so they're

Specification Place of originChinaMaterialMonolithic Silicon Carbide Ceramic +UHMWPESize254*305*28±2mm With cut corverCeramic Coverage250*300mmWeight 2.78±0.05kgCurvatureMulti CurveOut finish600D black oxford fabric coveringProtection LevelNIJ0101.06 level IV Stand aloneBullets Stop7.62*63 M2AP ; 7.62*54R API

Our bullet evidence protect produced of excessive general overall performance bullet proof composite cloth is characterized with the useful resource of tremendous bullet proof normal typical overall performance, massive protection vicinity, moderate weight, anti stab, anti explosive chips.About our Bulletproof ShieldStandard ：NIJ 0108.01 IIIA again 9*19mm Parabellum FMJ Basic material ：made from PE/ Aramid fabric Size ：900*500*8mm, can be customized. Color ：matte black  Protective area：  0.45㎡ Weight ：6KGS(Depend on size differ) Accessories ：soft ha

Features:•NIJ Protection levelComply with NIJ 0101.06 level ll-IIIABackface Signature (BFS) is less than 44mm•Protection PositionFront, back & sides•Material:UHMWPE or KEVLAR®•AccessoriesProtection level can be increased by adding ballistic inserts (front/back) into desired area•Carrier material:Nylon, Oxford & Cordura®•Color:Black, Olive Green, Navy Blue, Camouflage, etc.•Size:S to XXL size/ Customized Size SizesProtectionArea(m2)Weight(IIA)kgWeight(III)kgWeight(IIIA-9mm)kgWeight(IIIA-.44)kgPEAramidPEAramidPEAramidPEAramidS0.261.41.51.61.71.81.92.12.2M0.281.61.71.81.92.02.12.32.4

SizesProtectionArea(m2)Weight(IIA)kgWeight(III)kgWeight(IIIA-9mm)kgWeight(IIIA-.44)kgPEAramidPEAramidPEAramidPEAramidS0.321.81.92.02.12.32.42.62.7M0.341.92.02.12.22.42.52.72.8L0.362.12.22.32.42.62.72.93.0XL0.382.22.32.42.52.72.83.03.2XXL0.402.42.42.62.62.92.93.23.3 WITH SIDES PROTECTION FEATURES:NIJ Protection level  Comply with NIJ 0101.06 level II-IIIABackface Signature(BFS) is less than 44mmProtection Position Front&Back&Neck&SidesMaterialUHMWPE or AramidAccessoriesProtection level can be increased by adding ballistic inserts(front/back)into desired areaCarrier materia

Our ballistic visor provided to most of the main ballistic helmet manufacturers for military, para-army law enforcement, bomb disposal, and eod programs global.DETAILSProtection level : nij diploma iiia multiple photographs (save you 9mm fmj and .44 mag)Length of the visor: 145*365mm ±5mmWeight of the visor:1.1kg Weight with the holder :1.55+_0.05kgCloth :pc and bulletproof glass    Thickness: 22mm

the overall performance of products meets the global requirements of nij0101.06, astm1233, ul752; they're widely used on the observational window of light tank, explosion evidence car, infantry chariot and specific moderate armored automobile.

Our moderate bulletproof vests can used for all types of ballistic protection necessities; multiple hundred kinds to your preference: which incorporates complete-protection bulletproof vest, preferred bulletproof vest, concealable bulletproof vest, outer bulletproof vest, floating bulletproof vest, fast-removable bulletproof vest and woman bulletproof vest for girls, and so forth. we also can format and manufacture the bulletproof vest for unique use based on our clients, actual name for.

Pasgt is an acronym, status for employees armor gadget for ground troops. When utilized by itse lf, pasgt refers to both the vest and helmet collectively.FunctionsHigh ballistic performance with low weightThe usage of excessive-tenacity ballistic kevlar®/pe fiberPrecise processing method and perfect suit suspension deviceItemProtection levelmaterialThickness(mm)sizeHead   Circumference(cm)Weight (kg)Protection Area(sqm)With NailsWithout NailsPASGTIIIAKEVLAR6.8/7.8S54-581.42+_0.051.30+_0.050.111IIIAKEVLAR6.8/7.8M57-601.52+_0.051.40+_0.050.119IIIAKEVLAR6.8/7.8L59-631.57+_0.051.45+_0.05

Concealable Vest Features:•NIJ Protection levelComply with NIJ 0101.06 level ll-IIIABackface Signature (BFS) is less than 44mm•Protection PositionFront & back•Material:UHMWPE or KEVLAR®•AccessoriesProtection level can be increased by adding ballisticinserts (front/back) into desired area•Carrier material:Nylon, Oxford & Cordura®•Color:White, Black, Olive Green, Navy Blue, Camouflage, etc.•Size:S to XXL size/Customized SizeThrough special protection degree: in china, in step with the ga141-2010 elegant, the bulletproof vests are divided into 6 degrees: ga-1 to ga-6; in the usa, consiste

Product Details:•NIJ Protection levelComply with NIJ 0101.06 level ll-IIIABackface Signature (BFS) is less than 44mm•Protection PositionFront & back •Material:UHMWPE or KEVLAR®•AccessoriesProtection level can be increased by adding ballistic inserts (front/back) into desired area•Carrier material:Nylon, Oxford & Cordura®•Color:Black, Olive Green, Navy Blue, Camouflage, etc.•Size:S to XXL size/ Customized Size  SizesProtection  area(m2) Weight(IIA)kgWeight(IIIA-9mm)  kgWeight(ll) kgWeight(IIIA-.44)  kgPEARAMIDPEARAMIDPEARAMIDPEARAMIDS0.261.41.51.

Tactical quick launch device features: Nij safety degree:Follow nij 0101.06 level ll-iiia backface signature (bfs) is less than 44mmProtection role:The front&backFabric:Uhmwpe or kevlar®Add-ons:Protection   degree may be expanded via including ballistic inserts (the front/lower back) into desired   placeCarrier fabric:Nylon, oxford & cordura®Coloration:Black, olive inexperienced, army blue, camouflage, etc.Length:S to xxl length /custom designed sizeSizesProtectionArea(m2)Weight(IIA)kgWeight(III)kgWeight(IIIA-9mm)kgWeight(IIIA-.44)kgPEAramidPEAramidPEAramidPEAr

SDXX 119 Tactical Quick Release System Features: NIJ Protection levelComply with NIJ 0101.06 level ll-IIIA Backface Signature (BFS) is less than 44mmProtection PositionFront&backMaterial:UHMWPE or KEVLAR®AccessoriesProtection   level can be increased by adding ballistic inserts (front/back) into desired   areaCarrier material:Nylon, Oxford & Cordura®Color:Black, Olive Green, Navy Blue, Camouflage, etc.Size:S to XXL size /Customized Size Protection area(m2) Weight(IIA)kgWeight(IIIA-9mm) kgSizesWeight(ll)   kgWeight(IIIA-.44) kgPEARAMIDPEARAMIDPEAR